KroyTech Workbenches
Customers and Testimonials
Phone: 954-946-8539

[Home] [Sample Workbench Prices] [Customers & Testimonials] [Terms] [Warranty] [FAQ] [KroyTech] [ESD Description] [Chemical Resistant Description]

Some of Our Customers

Apple Auburn University, GA Baker Public Schools Boston Scientific Brascan Power Caltech (Cal. Inst. of Technology) Celestica Columbia Dental Lab Cornell University Customs Border Patrol Fairfield Industries Federal Aviation Administration Federal Express General Dynamics Hagemeyer North America Halliburton Honda R&D Lockheed Martin Lufthansa Medical Education Technologies (METI) Micron Systems Palomar Observatory Naval Undersea Warfare Center

Navigation Electronics Nipro Diabetes Systems North Fork Bank, NY Northrop Grumman Northern Lights Physical Sciences Progressive Medical Raytheon Rossford Junior High School, OH Staples Texas A&M University - Texarkana Tyco Electronics University of Colorado University of Massachusetts University of Texas Medical Branch UPS Uptake Medical US Army US Air Force US Marine Corps US Marshals Service US Navy Warren Consolidated Schools, MI

Some Testimonials

Wednesday, January 07, 2009 12:02 AM Kroy: Very happy if I made a difference... The bench is getting good use. It's rock solid and cosmetically flawless. I think I made a good choice... J Regards, Bill Hawkins Comments: This customer actually had some initial problems with some accessories and very successfully did his own self-service. We encourage customers to notify us upon inspection so we can immediately send replacement parts.

Thursday, January 01, 2009 10:40 PM Kroy: I wanted to tell you that I have the workbench, it is fully assembled, and I'm very happy with it. The workbench, uprights and shelving was all 100% correct, and was absolutely no problem at all to assemble. . . . Best regards, Bill Hawkins [Owner]

Monday, August 11, 2008 9:01 AM Kroy, Just wanted to let you know the benches were received and have been assembled. Everything went together with no problems, and they look real good.... ... Emailed question: How long did it take to assemble the workbenches? (This order was for 8 - 8 ft benches with 1 accessory.) I did it myself and each bench took a few minutes to unpack and less then 10 minutes to assemble.... Rob (Civ, US Army) Comments: Assembly is much faster with two men per bench. Workbench and accessory assembly is generally intuitive and simple. Most customers barely need the three-page instruction guide, even with numerous accessories and add-ons.

Friday, August 08, 2008 8:17 AM Hey Kroy, Just wanted to let you know that we like the workbenches you sold us a lot and I wanted to get a quote on one more. I need a 6’ bench exactly the same as the benches we ordered below with the same accessories. Thanks, Sam Card, MCP, MSSBS Card's Computers, Inc

Tue 3/25/2008 10:50 AM Kroy, Just want to let you know that the light frames fit perfectly! So from myself and my colleagues, Thank you very much to you Kroy and the facility that made the clip on the uprights bigger. I will keep in contact with possibly more orders because other areas of the facility are jealous of the light frames in our new final assembly room. Thank You!!! Jeff Crume Jr. C.I. Engineer-Tooling ... Conn-Selmer, Inc.

. October 18, 2007 6:33 PM I have ordered benches from KROY before and was very pleased with them. Could you please quote the above items. Thank you, Fernando, Engineering Lab Manager (Stratalight Communications)

. July 7, 2007 5:09 PM ...Thank you for all your help! If only all our suppliers gave us the same level of service! Thanks, John Nanry (Raytheon)

. July 25, 2006 2:25 PM ...it is a pleasure to work with someone as accommodating and genuinely helpful as you are. Beth (Texas A&M University)

. July 25, 2006 12:29 PM . . . We look forward to having another lovely workbench! Beth (Texas A&M University)

. April 12, 2006 4:34 PM Hi Kroy: We just got the benches. We put two together. They look great. And a week early. Great! I have a question on the foot rest. Is it really just a bar? I was thinking it was a pad that fit your feet. Please advise. I may be ordering more once I have a floor plan made. . . . We love them. They make the place look more open and professional. We had wood work benches. Name withheld (Avcom) Comments: The footrest is a 1" diameter chrome plated bar, adjustable forward and back along the bottom support. See picture (non-adjustable version).

. June 24, 2005 9:05 PM Confirmed the light fixture does work. Its just the plastic light cover that got cracked up on the corner that needs to be replaced.... I love the table. It's a cadillac. Put it together myself. Looks great. Actually the fax did not come through until today for some reason and I put it together myself (been around guys too long - what directions? Don't need no stinky directions). Cheryl (Alaska Native Technologies) Comments: Damage to Light Fixtures is much less common now with our new carrier and packing. A replacement Light Fixture was shipped to this customer. Workbenches are very easy to assemble, though we usually recommend 2 men per bench. This customer had most of the typical options, accessories and light system to assemble.

. June 23, 2005 4:52 PM Kroy: Sorry, I meant to let you know how much we like the benches. They really look great. The best part is that I was out of town when they arrived so my engineer had to unload and assemble! The only problem we are having is figuring out how to install the drawer option (D6/12). Do you have any instructions on installing this? Thanks again. Name withheld (XycomeVME) [Comment: Very simple instructions are included. Faxed a copy to him as soon we received his message.]

. June 21, 2005 12:26 PM Hi Kroy, The quality of the equipment is outstanding. Pricing was great, the speed upon which we received the order was stellar and your support exceeded our expectations! I will recommend your firm to anyone here who needs lab benches or tables. Thanks and hope to do business again. Best regards, Carrie (Apple)

. January 25, 2005 10:42 PM Hi Kroy, ...I've been meaning to contact you to thank you and let you know everything turned out terrific. We are very pleased with the product and the conscientious service we have received. Dawn does wish she had ordered 4 roll holders instead of 3. Would the cost to order one more roll holder be practical or would the shipping be too much? Again, thanks for all your help. I would not hesitate to recommend your fine product and service to anyone. Name withheld (DawnSews)

. December 23, 2004 8:46 PM HI Kroy, Thank you for the quality service and being a day ahead of your promised delivery date We got our shipment this afternoon and I have assembled the workbenches. All looks excellent and went together with ease. This is really a quality, well built product. The three R72 Roll Holders (3 for K4872 bench) did not arrive. They are not listed on the BenchPro work order # 4672 I received from the Fed Ex driver but I do see them in our quote below. Please let us know when we should be on the look out for the R72’s. (not a problem for now) We are delighted with both the product and service you have provided. Happy holidays. Name withheld (DawnSews) [Comment: Missing parts were shipped immediately.]

. October 26, 2004 6:57 AM Hi Kroy, Good to hear from you. Yes, the benches worked out fine for us. No problems thus far and I don't expect any. The guys using them seem to like them. Would buy them again in a heartbeat. Greg (PSI Corp.)